Neutrino flux predictions for known Galactic microquasars

It has been proposed recently that Galactic microquasars may be prodigious emitters of TeV neutrinos that can be detected by upcoming km^2 neutrino telescopes. In this paper we consider a sample of identified microquasars and microquasar candiates, for which available data enables rough determination of the jet parameters. By employing the parameters inferred from radio observations of various jet ejection events, we determine the neutrino fluxes that should have been produced during these events by photopion production in the jet. Despite the large uncertainties in our analysis, we demonstrate that in several of the sources considered, the neutrino flux at Earth, produced in events similar to those observed, would exceed the detection threshold of a km^2 neutrino detector. The class of microquasars may contain also sources with bulk Lorentz factors larger than those characteristic of the sample considered here, directed along our line of sight. Such sources, which may be very difficult to resolve at radio wavelengths and hence may be difficult to identify as microqusar candidates, may emit neutrinos with fluxes significantly larger than typically obtained in the present analysis. These sources may eventually be identified through their neutrino and gamma-ray emission.Comment: 17 pages. Submitted to Ap

Probing Micro-quasars with TeV Neutrinos

The jets associated with Galactic micro-quasars are believed to be ejected by accreting stellar mass black-holes or neutron stars. We show that if the energy content of the jets in the transient sources is dominated by electron-proton plasma, then a several hour outburst of 1--100 TeV neutrinos produced by photo- meson interactions should precede the radio flares associated with major ejection events. Several neutrinos may be detected during a single outburst by a 1km^2 detector, thereby providing a powerful probe of micro-quasars jet physics.Comment: Accepted to PRL. More detailed discussion of particle acceleratio

Scatterer that leaves "footprints" but no "fingerprints"

We calculate the exact transmission coefficient of a quantum wire in the presence of a single point defect at the wire's cut-off frequencies. We show that while the conductance pattern (i.e., the scattering) is strongly affected by the presence of the defect, the pattern is totally independent of the defect's characteristics (i.e., the defect that caused the scattering cannot be identified from that pattern).Comment: 4 pages, 3 figure

Carbide coated fibers in graphite-aluminum composites

The NASA-supported program at the Los Alamos Scientific Laboratory (LASL) to develop carbon fiber-aluminum matrix composites is described. Chemical vapor deposition (CVD) was used to uniformly deposit thin, smooth, continuous coats of TiC on the fibers of graphite tows. Wet chemical coating of fibers, followed by high-temperature treatment, was also used, but showed little promise as an alternative coating method. Strength measurements on CVD coated fiber tows showed that thin carbide coats can add to fiber strength. The ability of aluminum alloys to wet TiC was successfully demonstrated using TiC-coated graphite surfaces. Pressure-infiltration of TiC- and ZrC-coated fiber tows with aluminum alloys was only partially successful. Experiments were performed to evaluate the effectiveness of carbide coats on carbon as barriers to prevent reaction between alluminum alloys and carbon. Initial results indicate that composites of aluminum and carbide-coated graphite are stable for long periods of time at temperatures near the alloy solidus

Carbide coated fibers in graphites-aluminum composites

Research activities are described for a NASA-supported program at the Los Alamos Scientific Laboratory to develop graphite fiber-aluminum matrix composites. A chemical vapor deposition apparatus was constructed for continuously coating graphite fibers with TiC. As much as 150 meters of continuously coated fibers were produced. Deposition temperatures were varied from 1365 K to about 1750 K, and deposition time from 6 to 150 seconds. The 6 sec deposition time corresponded to a fiber feed rate of 2.54 m/min through the coater. Thin, uniform, adherent TiC coats, with thicknesses up to approximately 0.1 micrometer were produced on the individual fibers of Thornel 50 graphite yarns without affecting fiber strength. Although coat properties were fairly uniform throughout a given batch, more work is needed to improve the batch-to-batch reproducibility. Samples of TiC-coated Thornel 50 fibers were infiltrated with an aluminum alloy and hot-pressed in vacuum to produce small composite bars for flexure testing. Strengths as high as 90% of the rule-of-mixtures strength were achieved. Results of the examination of the fracture surfaces indicate that the bonding between the aluminum and the TiC-coated fibers is better than that achieved in a similar, commercially infiltrated material made with fibers having no observable surface coats. Several samples of Al-infiltrated, TiC-coated Thornel 50 graphite yarns, together with samples of the commercially infiltrated, uncoated fibers, were heated for 100 hours at temperatures near the alloy solidus. The TiC-coated samples appear to undergo less reaction than do the uncoated samples. Photomicrographs are shown

Carbide coated fibers in graphite-aluminum composites

The study of protective-coupling layers of refractory metal carbides on the graphite fibers prior to their incorporation into composites is presented. Such layers should be directly wettable by liquid aluminum and should act as diffusion barriers to prevent the formation of aluminum carbide. Chemical vapor deposition was used to uniformly deposit thin, smooth, continuous coats of ZrC on the carbon fibers of tows derived from both rayon and polyacrylonitrile. A wet chemical coating of the fibers, followed by high-temperature treatment, was used, and showed promise as an alternative coating method. Experiments were performed to demonstrate the ability of aluminum alloys to wet carbide surfaces. Titanium carbide, zirconium carbide and carbide-coated graphite surfaces were successfully wetted. Results indicate that initial attempts to wet surfaces of ZrC-coated carbon fibers appear successful

The perception of stroke-to-stroke turn boundaries in signed conversation

Speaker transitions in conversation are often brief, with minimal vocal overlap. Signed languages appear to defy this pattern with frequent, long spans of simultaneous signing. But recent evidence suggests that turn boundaries in signed language may only include the content-bearing parts of the turn (from the first stroke to the last), and not all turn-related movement (from first preparation to final retraction). We tested whether signers were able to anticipate “stroke-to-stroke” turn boundaries with only minimal conversational context. We found that, indeed, signers anticipated turn boundaries at the ends of turn-final strokes. Signers often responded early, especially when the turn was long or contained multiple possible end points. Early responses for long turns were especially apparent for interrogatives—long interrogative turns showed much greater anticipation compared to short ones

Distinguishing selection pressures in an evolving communication system: Evidence from colournaming in 'cross signing'

Cross-signing—the emergence of an interlanguage between users of different sign languages—offers a rare chance to examine the evolution of a natural communication system in real time. To provide an insight into this process, we analyse an annotated video corpus of 340 minutes of interaction between signers of different language backgrounds on their first meeting and after living with each other for several weeks. We focus on the evolution of shared color terms and examine the role of different selectional pressures, including frequency, content, coordination and interactional context. We show that attentional factors in interaction play a crucial role. This suggests that understanding meta-communication is critical for explaining the cultural evolution of linguistic systems

Interactional Structure Applied to the Identification and Generation of Visual Interactive Behavior: Robots that (Usually) Follow the Rules

Peer reviewe